How to Select Electric Heaters
Electric heaters come with a host of advantages that include low initial costs, little maintenance for homeowners, and efficient heating. They are also easier to utilize than heating systems that require venting.
They are especially beneficial when your electricity provider offers Economy 7, as the cheaper off-peak tariff can reduce heating costs.
Temperature Settings
Ideal is that your electric heater lets you to adjust and maintain the temperature you want without having to turn it on or off. This will reduce energy consumption and save you from entering an area that's too cold or leaving one that's too hot. Find a thermostat with the ability to set a timer, should it be available.
When choosing an electric heater, make sure that it's suitable for the space you have. A heater that is too small for your space will need to run longer than is necessary to reach the desired temperature, which is a waste of energy and causes the room to overheat. Utilize our calculator to determine the best heater's watts per square foot for your room.
Also, make sure that the knobs that regulate temperature are easy to adjust and reach. You may need to take off screws or peel back insulation to reach the knobs if they are recessed. This could be a hassle. It is also essential to verify the recommended temperature range to ensure safety and efficiency. Temperatures below 120 degrees can lead to bacteria growth and increase the risk of scalding, and temperatures higher than 140 degrees could pose a fire hazard.
The Everhot is a beautiful compact heater that can be utilized in conservatories or, as the company describes it: "annexes... narrow boats... shepherds' huts... Glamping pods." It can reach 200C and is therefore a good choice for heating and cooking. It has a timer, and an ECO setting that optimizes power and heat settings to be more efficient.
It's also quiet. There's no fan noise or the sound of whirring when you change the settings. This makes it an excellent option for bedrooms and living rooms. It comes with other features too including an integrated nightlight that lights up in a blue color when the heater is on and an integrated humidifier that can be adjusted to create intermittent mist to give a more subtle effect. It is also sturdy and safe, with a tip over shutoff switch as well as an overheating protection that automatically shuts the unit off when it is overheated. It's also registered with UL for safety.
Safety
Electric heaters should be used with caution. Fire hazards from heaters and carbon monoxide (CO) poisoning can be particularly hazardous to children, the elderly and those suffering from chronic health issues or immune system disorders. Additionally, children and pets could knock over a heater, leading to injury or even death.
ESFI suggests checking a heater's cord, plug and outlet regularly. Find signs of damage, like damaged or loose plug or a damaged cord. If the outlet or cord feels hot, you should stop using it and consult a certified electrician to repair it. Never connect more than one electrical device simultaneously as a space heater. This can overload the outlet and cause it to overheat.
It is recommended to use only heaters that have been listed or labelled by a nationally recognized testing laboratory, such as UL. These heaters are more likely than other models to comply with voluntary safety standards. Never place a heater near flammable materials, such as rugs or fabrics. Maintain a minimum of three feet between the heater and the combustible material. Also, do not place electric wood stove heaters in the bathroom or kitchen, and don't touch it if you're wet.
Also, make sure to connect the heater directly to an outlet on the wall. Do not use an extension cord. If realistic electric stove have to use an extension cord, choose the cord that is the shortest and most heavy-duty comprised of 14-gauge wire. Also, check for any loose outlets, which could indicate an overloaded circuit.
Keep the electric space heater at least six inches from anything that could cause. It's recommended to put a space heater on flat surfaces instead of putting it on cabinets, tables or furniture, as they could cause fire if it overheats. Lastly, be sure to turn off the heater and disconnect it when you leave the room or go to bed and leave it on to increase the risk of catching fire.
Taking the proper safety measures when using electric heaters can prevent injuries and reduce energy consumption. Electric heaters are often employed by facility managers to provide additional heat to offices and other common areas as temperatures drop. Preferred Climate Solutions installs and maintains outdoor or indoor electric heating systems to make your space as comfortable in these cold winter months as is possible. Contact us today to learn more about our heating solutions.
Energy Efficiency
Think about the energy efficiency of the portable heater before making your choice. This refers to the amount of energy required to produce the desired output. Heating systems that consume less electricity are thought to be more efficient and will help lower the overall cost of heating your home or business.
The heating element is utilized in the majority of electrical heaters to convert electrical energy into warmth. It is typically made up of a ribbon or coil flexible heater or tubular element that emits heat when a current flows through it. read more of heat that is produced depends on the type of heating element and the method by which it transmits heat (convection or radiation).
If you are concerned about the impact on the environment, choose an option that uses eco-friendly energy sources. This might be a renewable source of power or an alternative to fossil fuels like solar or wind.
Electric heaters' energy efficiency is also affected by the location and how the electricity is generated. Electricity derived from a wind or solar power plant will be more efficient than electricity that is generated by burning fossil fuels at a power station.
It is not enough to select a heater with an eco-friendly energy source, but also one that has many energy-saving features. These may include automatic shutoff mechanisms that will be activated in the event of an overheated unit or if the unit is accidentally tipping.
These security measures will safeguard your family or employees and can also help you reduce your energy costs by preventing excessive usage. Many portable electric heaters are designed to operate quietly too making them suitable for bedrooms, offices and other spaces that require a peaceful atmosphere.
Electric heaters can save you money by reducing maintenance calls. Gas heaters are more expensive to repair than an electric model, and the cost of maintenance could add up over time. Electric models are usually cheaper to maintain and usually include more advanced features that assist you in saving energy.
Installation
Electric heaters work by utilizing Joule energy, which converts electricity into radiant heat that warms the room. Electric heaters are also more efficient and cost-effective than other heating methods, especially gas. These heaters are not suitable for all households and may strain an existing electricity system. This is why it's best to have an expert electrician verify that the current system can handle the extra load of an electric wall heater before installing one.
When choosing an electric heater you need to consider several aspects, including the type and size of the heater as well as the room the room it will be installed. The kind of heater you choose will determine the amount it will cost to run. Electric baseboard heaters are more expensive to run than portable heaters or space heaters, however they provide a more even heat and do not require chimneys or vents.
Electric fan heaters have an air blower that circulates hot air through the room. This type of electric heater is the least expensive, but can be noisy and take longer to heat up a room.
Find the space heater with a built-in thermostat. This feature allows you to set a temperature and the heater will shut off automatically when it gets to the temperature. This can drastically reduce your consumption of energy and keep you from turning the heater on and off.
Before you attempt to install an electric heater, make sure that the power is turned off on the breaker panel. Also, confirm that the circuit is turned off using a test device. Mark the area on the wall where you intend to mount the heater and cut a hole in the drywall. Utilize a drywall cutter to remove the required section. Be careful not to damage any electrical pipes or wires.
Run a cable 14/2 of the same length and gauge as the wires that are already in use from the breaker box up to the wall opening. Connect each wire to the screw in the outlet box by removing about 1 inch of insulation. Label this wire as the "line" by labeling it or marking it with a piece red tape. Then, connect it to the wire leads that are marked "load" in the thermostat box.